24
OPERATION
OPERATION
Operation Overview
Using the Appliance
Before the first wash, select the
Cotton
wash programme and add a half amount
of the detergent. Start the appliance
without clothes. This will remove
possible residues and water from the
drum that may have been left during
manufacturing.
1
Sort clothes by fabric type, soil level,
colour and load size as needed.
2
Open the door and load items into
the appliance.
• Before closing the door, ensure that all
clothes and items are inside the tub
and not overhanging on the rubber
door seal where they will become
caught when the door is closed. Failing
to do so will cause damage to the door
seal and the clothes.
3
Close the door.
• Remove items from the flexible door
seal gasket to prevent clothing and
door seal damage.
4
Add cleaning products or detergent
and softener.
• Add the proper amount of
detergent to the detergent
dispenser. If desired, add fabric
softener to the appropriate areas of
the dispenser.
5
Press the
Power
button to turn on
the appliance.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
