LG FH0C7FD3 - How to Set Rinse Spin Enable

61
PROGRAMMING MODE - SETUP MODE
27. How to set rinse spin enable
Enter setup mode.
You will see LqC1
Button Display
Press the
Hot
button.
Press the
Warm
or the
Cold
button until appears
in the display.
Press the
Start
button.
Press the
Warm
or the
Cold
button until appears
in the display.
Press the
Start
button.
Display step of rinse.(rs1~rs5)
Press the
Warm
or the
Cold
button to select risne spin
or .
Press the
Start
button.
The machine sets up the rinse spin and display next
step of rinse.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready
mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• All types - Push the Hot button twice.