LG FH0C7FD3 - Cycle Kill

69
PROGRAMMING MODE - TEST MODE
Enter setup mode.
You will see LqC1
Button Display
Press the
Warm
or the
Cold
button until appears
in the display.
Press the
Start
button.
Press the
Warm
button until appears in the
display.
Press the
Start
button.
Start drain and display spin time.
Display spin time
Display with beeping.
Go back to ready mode.
Insert cycle kill
card.
Description Display
Display spin time. Spin Time
Begin to drain. Spin Time
Remove cycle kill card.
Go back to ready mode.
5. Cycle Kill
Coin / OPL type
Card type