Operating 15
Operating
3
Basic Operations
USB Operations
1. Connect the USB device to the USB port.
2. Select USB function by pressing F.
To Do this
Playback
Press N on the remote control or
T on the unit.
Pause
Press N on the remote control or
T on the unit during playback.
Searching
for a section
within a le
Press and hold C/V on the
remote control or Y/U on the
unit during playback and release it at
the point you want to listen to.
Skipping to
the next/
previous le
Press V on the remote control
or U on the unit to go to the
next le.
Playing less than 2 seconds, press
C on the remote control or Y
on the unit to go to the previous le.
Playing after 3 seconds, press C
on the remote control or Y on
the unit to go to the beginning of
the le.
Playing
repeatedly or
randomly
Press REPEAT on the remote
control repeatedly.
y The display changes in the following order.
USB
*RPT 1
RPT**DIR
RPT ALL
RANDOM
OFF
*RPT : Repeat
**DIR : Directory
y When you play JUKE BOX list, only RPT 1 and
RPT ALL are available.
y Even after restarting the unit or switching
one function to another, you can listen to
music from the point where it’s last been
played.
,
Note
To Next Page
Loading...
