- 27 -
Copyright©2010 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
3) In Service Menu.
※ When doing Adjustment, Please make circumstance as below.
4.3 DPM Operation check
■ Measurement Condition: 100~240V@ 50/60Hz
1) Set Input to DisplayPort/MiniDP, HDMI1, HDMI2
2) Turn off the source device.
3) Check DPM operation refer to the below table.
Operating Condition
Sync (H/V)
or Video
EUT
(MSPG6100)
LED(SET) Wattage(W)
Sleep mode Off/Off Off White blinking
0.5W
Off mode - -
Off
Mech. Switch off
Off
0.3W DC Switch Off
5. Shipping condition
No. Item Content& Outgoing Condition
비고
2
Outgoing
Condition
SOURCE HDMI1
Power S/W OFF
Brightness 100
OSD
Menu
Contrast 70
Volume 30
To Next Page
Loading...
