To Next PageTo Next Page
Need help?Do you have a question about the LG FLATRON 27UD68WG and is the answer not in the manual?
General| Color | silver |
|---|---|
| Screen Type | led |
| Webcam | no |
| OS Compatibility | windows |
| Screen Size | 27 inches |
| Panel Type | ips |
| Aspect Ratio | 16:9 |
| Resolution | 3840 x 2160 |
| Native Resolution | 3840 x 2160 |
| Refresh Rate | 60hz |
| Horizontal Viewing Angle | 178 degrees |
| Vertical Viewing Angle | 178 degrees |
| Response Time | 5 milliseconds |
| Brightness | 350 candela per square meter |
| Contrast Ratio | 5, 000, 000:1 |
| Synchronization | freesync (amd adaptive sync) |
| HDR | no |
| Built-In Speakers | no |
| HDMI Ports | 2 |
| Power Consumption | 29 watts |
| Depth with Stand | 7.3 inches |
| Width with Stand | 24.2 inches |
| Net Weight without Stand | 10.8 pounds |
Guidelines for safe operation and handling, covering electrical safety and component protection.
Precautions for safely handling the LCD module to prevent physical damage and ensure user safety.
Warnings and procedures for electrical shock prevention, including leakage current testing methods.
Standard procedures for servicing, including power disconnection, cleaning, and test equipment usage.
Methods to prevent damage to sensitive electronic components from static electricity during handling.
Best practices for soldering and unsoldering components to ensure circuit integrity and part longevity.
Detailed instructions for replacing ICs, transistors, diodes, fuses, and resistors.
Techniques for repairing damaged copper traces on circuit boards using jumper wires.
Defines the active display area and its relation to the monitor bezel for accurate placement.
Detailed timing parameters for DisplayPort video and sync signals, crucial for signal integrity.
Detailed timing parameters for HDMI video and sync signals, crucial for signal integrity.
Defines the scope of the document and identifies the product for adjustment procedures.
Steps for checking the main PCB, including ADC, function tests, and interface checks.
Procedures for writing HDCP keys into EEPROM during the assembly line process.
Steps for performing white balance checks and factory calibration for optimal display performance.
Procedure to verify the Dynamic Power Management (DPM) operation according to specified conditions.
Information on accessing the service menu and details on final product shipping conditions.
Details on I2C communication, commands, and sequences required for product adjustment.
Diagnostic steps and checks for identifying and resolving power-related issues in the monitor.
Diagnostic steps for issues where no image or On-Screen Display (OSD) is displayed.
Steps to diagnose and resolve problems related to Dynamic Power Management (DPM) functionality.
