To Next PageTo Next Page
Need help?Do you have a question about the LG FLATRON 29UM68 and is the answer not in the manual?
General| Screen Size | 29 inches |
|---|---|
| Resolution | 2560 x 1080 |
| Panel Type | IPS |
| Aspect Ratio | 21:9 |
| Refresh Rate | 75 Hz |
| Response Time | 5ms (GTG) |
| Brightness | 250 cd/m² |
| Contrast Ratio (Typical) | 1000:1 |
| AMD FreeSync | Yes |
| Color Gamut | sRGB 99% |
| Connectivity | HDMI, DisplayPort |
| Viewing Angle | 178°(H), 178°(V) |
| Ports | 2 x HDMI, 1 x DisplayPort |
| VESA Mount | 75 x 75 mm |
| Power Consumption | 30W (Typical) |
Critical parts must be replaced with manufacturer-specified parts to prevent hazards.
Guidelines for handling LCD modules to prevent damage and ensure safety.
Warning about electric shock, especially when replacing backlight components.
Procedure for leakage current test and caution for service tools.
General servicing rules, ESD prevention, and soldering best practices.
Procedures for replacing ICs, transistors, and diodes.
Steps for replacing fuses/resistors and repairing circuit board foils.
Details on brand, model, region, features, chassis, and interface.
Physical dimensions, weight, and appearance details of the monitor.
Specifications related to optical characteristics like luminance and contrast.
Horizontal/vertical viewing angles and average luminance values.
Contrast ratio and response time specifications.
Technical specs like operating frequency, resolution, and input voltage.
Sleep/off modes, MTBF, and environmental operating/storage limits.
OSD menu items for channel, adjustment, audio, setup, and quick settings.
PBP features, picture modes, adjustments, and game settings.
Color temperature, RGB, six-color, and MaxxAudio settings.
Language, energy saving, power LED, standby, buzzer, OSD lock.
LCD module maker, type, active area, and CIE color coordinates.
Active display area dimensions relative to the bezel.
EDID identification, DDC 2AB protocol, and HDMI 1 data.
EDID data for HDMI 2, Display Port (Freesync ON/OFF), and PBP.
Display Port EDID data (Ver 1.4) and PBP EDID data.
HDMI 2 and Display Port EDID data.
Diagrams and tables for video, sync, and H/V timing.
Factory supported video modes for HDMI input.
Application, designation, PCB check, ADC, and EDID processes.
HDCP keys, color/gamma calibration, and preset adjustments.
DPM operation checks and shipping condition settings.
I2C, command format, and screen adjustment commands.
Commands for EDID SN update and EEPROM data write.
EEPROM data read and EDID read procedures.
PCB part number, size, and layer count.
Troubleshooting flowchart for "No Power" issues.
Troubleshooting flowchart for "No Raster" or OSD display issues.
Troubleshooting for DisplayPort/HDMI (DPM) issues.
Safety notice regarding special safety-related parts.
Diagrams for HDMI, DisplayPort interfaces, and ESD protection.
Power supply lines and capacitor connections for the main IC.
Power supply lines and capacitor connections for the main IC.
Schematic for DC jack and power sequence of 1.8V/1.15V rails.
Schematics for the 29-inch and 34-inch LED driver circuits.
Schematics for speaker and headphone amplifier circuits.
