LG FLATRON 29UM68 - SPECIFICATIONS (Continued); Applied LCD Module Details; Display Area Specifications

- 12 -
Copyright © 2010 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
(1) Standard Measurement Condition
• Ambient Luminance Level : dark ( < 10 lux)
• Ambient Temperature : Normal Temperature(10ºC ~ 25ºC)
• warm-up Time : More than 30 min (at Full White Pattern)
• Input Signal : VESA 1920 X 1080 @ 60 Hz
• Contrast : 70 (But, the contrast is 100 when we check response time)
• Brightness : Max. 100
• Color Temp : CUSTOM
• Clock/Clock Phase : The Best Setting
(2) Another Spec.: Product Specification Standard( LG(55)G1-1034 )
(3) Cosmetic Spec. : LCD Module IIS Spec.
C
5.1 Display Area
Active area
A
1) Active Display Area of the LCD Monitor Should be within Cabinet’s Bezel.
2) Distance Difference between Active Area and Bezel
A A B
| A-B|<1.0 mm , | C-D|<1.0 mm
A: The Distance from The Left of Active Area to the Bezel
Bezel
B: The Distance from The Right of Active Area to the Bezel
C: The Distance from The Top of Active Area to the Bezel
D: The Distance from The Bottom of Active Area to the Bezel
D
5. Applying module Character
1
LCD Module
Feature
Maker LGD
Type IPS
Active Display Area 29 inches(73.025cm) diagonal (21:9)
Pixel Pitch [mm] 0.2628(H)mm x 0.2628(V)mm
Electrical Interface 2ch-LVDS(41P) X 1, 2ch-LVDS(51P) X 1
Color Depth 6-bit + A-FRC, 16.7M colors
Size (Outline) [mm] 693.6(H) x 308.9(V) x17(D)mm(Typ.)
Surface Treatment
Hard coating (3H) & Anti-Glare treatment of
the front polarizer
Operating Mode Transmissivemode, normally Black
Back light Unit White LED
R/T
Typical 14ms
Max. 28ms
No Item Content Remark
6
CIE
Color
Coordin
at
es
(색좌표)
Minimum Normal Maximum
White
W
X
Typ-0.03
0.313
Typ+0.03
Warm
(6500K)
W
Y
0.329
White
W
X
Typ-0.03
0.295
Typ+0.03
Medium
(8000K)
W
Y
0.305
White
W
X
Typ-0.03
0.283
Typ+0.03
Cool
(9300K)
W
Y
0.298
RED
R
X
Typ-0.03
0.660
Typ+0.03
Warm
(6500K)
R
Y
0.331
GREEN
G
X
0.306
G
Y
0.609
BLUE
B
X
0.149
B
Y
0.062