Operation
A11
On Screen Display (OSD) Control Adjustment
Making adjustments to the image size, position and operating
parameters of the monitor are quick and easy with the On Screen
Display Control system. A quick example is given below to familiarize
you with the use of the controls. Following section is an outline of the
available adjustments and selections you can make using the OSD.
To make adjustments in the On Screen Display, follow these steps:
11
11
Press the OSD Button, then the main menu of the OSD appears.
22
22
To acces a control, use the or Buttons. When the icon you
want becomes highlighted, press the SET Button.
33
33
Use the Buttons to adjust the item to the desired level.
44
44
Accept the changes by pressing the SET Button.
55
55
Exit the OSD by Pressing the OSD Button.
To Next Page
Loading...
