LG Flatron 795FT Plus - Page 16

Operation
A13
On Screen Display(OSD) Selection and
Adjustment
OSD Adjust Description
SIZE
49
64
SHAPE
VIDEO LEVEL 0.7V
DDC ON
LANGUAGE ENGLISH
BEEP ON
OSD POSITION
SETUP
Vertical Size
To adjust image height.
Horizontal Size
To adjust image width.
Side Pincushion
To correct the bowing in and out of the
image.
Side pincushion balance
To correct the balance of both sides
bowling.
Trapezoid
To correct geometric distortion.
Parallelogram
This control adjusts for a skewing
of the screen image.
Tilt
To correct image rotation.
Pin S Adjust
To correct the balance of both sides
S bowling.
Pin W Adjust
To correct the balance of both sides
W bowling.
This item is used to select the monitor's
input signal level. The normal level
used for most PC's is 0.7V.
When the screen suddenly gets
brightened or blurry, please select
1.0V and try again.
To select the DDC function(ON/OFF).
To choose the language in which
the control names are displayed.
To adjust position of the OSD
window on the screen.
To select beep ON or OFF.
VIDEO LEVEL
DDC
LANGUAGE
OSD POSITION
BEEP
SIZE
SHAPE
SETUP
OSD
SET
SET
OSD