To Next PageTo Next Page
Need help?Do you have a question about the LG Flatron L1953S and is the answer not in the manual?
General| Screen Size | 19 inches |
|---|---|
| Panel Type | TN |
| Resolution | 1280 x 1024 |
| Aspect Ratio | 5:4 |
| Brightness | 300 cd/m² |
| Contrast Ratio | 700:1 |
| Response Time | 5 ms |
| Viewing Angles | 160° horizontal, 160° vertical |
| Weight | 4.2 kg |
| Connectivity | D-Sub (VGA) |
| Input Connectors | D-Sub |
Details of the LCD panel's physical and electrical properties.
Describes viewing angle and luminance specifications.
Covers sync signal types and video input signal parameters.
Specifies the maximum display resolution supported.
Details power input requirements and consumption levels.
Outlines operating temperature and humidity conditions.
Provides physical measurements and weight for monitor models.
Highlights critical safety components requiring specific replacement parts.
Provides guidance on safely handling the LCD module to prevent damage.
Alerts to high voltage hazards, especially with CCFL/inverter circuits.
Describes a circuit for checking leakage current during servicing.
Standard safety procedures for servicing electronic equipment.
Methods to prevent damage to sensitive components from static electricity.
Best practices for soldering and unsoldering electronic components.
Step-by-step process for replacing integrated circuits.
Procedures for replacing small-signal and power transistors.
Steps for replacing diodes, fuses, and conventional resistors.
Guidelines for repairing damaged copper traces on circuit boards.
Explains the function of the video signal amplification and conversion.
Describes the power supply circuitry and voltage regulation.
Details the microcontroller unit and its associated memory and control functions.
Explains the operational flow and function of the LIPS board components.
Guide for setting up and using the EDID adjustment program.
Steps for configuring the serial port for the adjustment program.
Instructions for reading and writing EDID data using WinEDID.
Lists and describes the functionalities available within the Service OSD menu.
Diagnostic steps for when the monitor does not power on.
Troubleshooting steps for a blank screen with no OSD on LIPS models.
Troubleshooting steps for a blank screen with no OSD on MSTAR models.
Diagnosing issues related to the DPM (Display Power Management) function.
Troubleshooting steps specifically for power-related issues.
Steps to troubleshoot when the backlight (raster) is not functioning.
Detailed schematic of the scaler IC and its connections.
Schematic details for the power supply and associated components.
Schematic diagram of the inverter circuit controlling the backlight.
Schematic diagram of the power supply unit and its components.
