LG Flatron M228WA - Page 23

- 23 -
Copyright 2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
5. No Raster on DVI Signal
6. No Raster on Video (CVBS, S-Video) Signal
Repeat [A, B] process.
Pass
Check the input/ output
of R100.
Fail
Re-soldering or change the
defect part, Check the
X100.
Check input source cable
and jack.
Pass
Check input source cable
and jack.
Repeat [A, B] process.
Fail
Check short of
IC100, Q307.
Fail
Fail
Pass
Check
the input/output of
L804, L1002,L1003,
L1004.
Change L804, L1002,
L1003, L1004.
Check Output of
IC1104, IC1105.
Re-soldering of Change
defect part, Check the
X100.
Pass
Pass
Pass
X100
X100