EasyManua.ls Logo

LG FV1408S4W - User Manual

LG FV1408S4W
44 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
www.lg.com
Copyright © 2019-2020 LG Electronics Inc. All Rights Reserved
OWNER'S MANUAL
WASHING MACHINE
Before beginning installation, read these instructions carefully. This will simplify
installation and ensure that the product is installed correctly and safely. Leave
these instructions near the product after installation for future reference.
EN ENGLISH
FV1450S4V F4V5RYP**
FV1408S4W F4V5TYP**
FV1409S4W F4V5VYP**
MFL71408018
Rev.02_030420

Table of Contents

Questions and Answers

  • S
    Susan NorrisAug 11, 2025
    What to do if my LG Washer shows UE UNBALANCE ERROR?
    • C
      Colin LeachAug 12, 2025
      If your LG Washer displays a UE UNBALANCE ERROR, it indicates the appliance's system has detected an imbalance. This can occur if the laundry is too wet at the end of the cycle. Try rearranging the load to allow for proper spinning, then close the door and press the Start/Pause button. It may take a moment for the appliance to begin spinning, and the door must be locked. Also, if the load is too small, add 1 or 2 similar items or smaller articles to help balance the load, then close the door and press Start/Pause button.
  • K
    kevin10Aug 17, 2025
    Why does my LG FV1408S4W show a UE UNBALANCE ERROR?
    • W
      william11Aug 17, 2025
      If you encounter a UE UNBALANCE ERROR on your LG Washer, it could be due to the laundry being too wet at the end of the cycle. Try rearranging the load to allow for proper spinning. Then, close the door and press the Start/Pause button. It might take a moment for the appliance to begin spinning, as the door must be locked first. Alternatively, if the load is too small, adding one or two similar or smaller items can help balance it. Again, close the door and press Start/Pause.
  • J
    janetfarleyAug 23, 2025
    What to do if my LG FV1408S4W Washer displays OE WATER OUTLET ERROR?
    • A
      ann40Aug 23, 2025
      If your LG Washer shows an OE WATER OUTLET ERROR, it means there's a problem with the water draining. First, check the drain hose to see if it's kinked or clogged; if so, clean and straighten it. Also, inspect the drain filter for any clogs and clean it if necessary.
  • P
    paul81Aug 29, 2025
    What to do if my LG Washer shows a 1E INLET ERROR?
    • L
      leslie71Aug 29, 2025
      If your LG Washer displays a 1E INLET ERROR, it indicates a problem with the water supply. First, check another tap in your house to ensure the water supply is adequate. Make sure the water supply tap is fully open. Inspect the water supply hoses for any kinks and straighten them, or reinstall the hose if necessary. Also, check and clean the filter of the inlet hose. Finally, if you have an aqua stop supply hose and notice water leakage with a red indicator, replace the hose.
  • R
    ryanjohnsonSep 4, 2025
    How to fix OE WATER OUTLET ERROR on LG Washer?
    • J
      jasonwallaceSep 4, 2025
      If you're getting an OE WATER OUTLET ERROR on your LG Washer, the drain hose may be kinked or clogged. Clean and straighten the drain hose. Also, the drain filter might be clogged, so check and clean that as well.

LG FV1408S4W Specifications

General IconGeneral
BrandLG
ModelFV1408S4W
CategoryWasher
LanguageEnglish

Related product manuals