- 135 -
Copyright © 2009 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
11. STAND ALONE TEST
11. STAND ALONE TEST
11.1 Introduction
This manual explains how to examine the status of RX and TX of the model.
A. Tx Test
TX test - this is to see if the transmitter of the phones is activating normally.
B. Rx Test
RX test - this is to see if the receiver of the phones is activating normally.
11.2 Setting Method
1. Set COM Port
2. Check PC Bau Rate
3. Confirm EEPROM & Delta file prefix name
4. Click “Update Info” for communicating Phone and Test-Program
To Next Page
Loading...
