- 137 -
Copyright © 2009 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
11. STAND ALONE TEST
1. “Non signaling mode” bar and then confirm “OK” text in the command line.
2. Put the number of TX Channel in the ARFCN
3. Select “Tx” in the RF mode menu and “PCL” in the PA Level menu.
4. Finally, Click “W
rite All” bar and try the efficiency test of Phone.
11.3 Tx Test
Change “ptest mood”
To Next Page
Loading...
