HOW TO USE
8
Defrost
As the refrigerator operates, the moisture from foods
or in the air may be frosted on to the inner part of the
re-frigerator and the surface of evaporator.Too thick
frost will affect the operation of the refrigerator, so
regularly defrosting is necessary.Usually,defrosting is
necessary when the thickness reaches 5mm.
• Refrigerator compartment
Defrosts automatically,moisture on the inner side runs
into the drip tray through the drain pipe.The heat
gene-rated by compressor evaporates the water
automatically.
Drain pipe
- keep the drain pipe straight so that water can inpour into the drip tray. When it's blocked,take out
the drain cover,clean it and then replace it.
• Freezing compartment
Before defrosting—turn the thermostat knob to "0",open the door,take out foods and drawers in
the freezing compartment,foods may be put into refrigerator compartment temporarily.
Defrosting—remove the frost on the inner side of the freezing compartment and on the surface of
the evaporator with the ice scraper, then wipe off the water with a dry cloth. After defrost—turn
the thermostat knob to the former position.
Ice making
• Fill the ice tray with water to 4/5 of its
capacity and place it into the freezing
compartment,tum the thermostat knob
to "6".
• Twist the both sides of the ice tray so
as to remove the ice cubes easily.
Note:
To Next Page
Loading...
Need help?
General
