26
OPERATION
2
With the drawer fully extended, lift up the front
and pull the drawer out to remove it.
3
Mount the freezer drawer in the reverse order
of the removal process.
• The drawers are heavy. Always use two hands
when removing or refitting the drawers to avoid
product damage or personal injury.
• Always open the freezer doors completely
before removing or refitting the drawers.
Shelf
• Glass shelves are heavy. Use special care when
removing them.
• Do not clean glass shelves with warm water
while they are cold. Shelves may break if
exposed to sudden temperature changes or
impact.
Using the Folding Shelf
This feature is only available on some models.
Store taller items, such as a gallon container or
bottles, by pushing the front half of the shelf
underneath the back half of the shelf. Pull the front
of the shelf forward to return to a full shelf.
Removing/Refitting the Shelf
1
To detach, tilt up the front of the shelf then lift
the shelf straight up at the back.
2
Tilt the shelf at an angle and pull it out.
3
To assemble, tilt the front of the shelf up and
guide the shelf hooks into the slots at a desired
height.
4
Lower the front of the shelf so that the hooks
drop into the slots.
• Make sure that shelves are level from one side to
the other. Failure to do so may result in the shelf
falling or spilled food.
• Do not clean glass shelves with warm water
while they are cold. Shelves may break if
global_main.book.book Page 26 Wednesday, January 6, 2021 8:35 AM
To Next Page
Loading...
Need help?
General
