- 97 -
Copyright © 2009 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
5. DOWNLOAD
1. Connect cable within the device.
2. Windows will pop-up Found new hardware wizard and detect the new
usb device.
3. Check “Install the software automatically (Recommended)” button,
install driver for the device. (or set specific location.)
4. In case of Infineon, “Flash Loader utility” will be installed.
In case of Neptune, “LGE GSM Device OMAPV1030” will be installed.
5. If you have several usb ports for usb download, you have to repeat
installation from No. 1 to No. 3 for each the usb port.
2. Device Detection
Device Detection
USB Port Mapping
Configuration
to Download
USB Driver Installation
to Download
Whole Process
5.2.1.2
To Next Page
Loading...
