- 98 -
LGE Internal Use Only Copyright © 2009 LG Electronics. Inc. All right reserved.
Only for training and service purposes
5. DOWNLOAD
1. Run USB Map Program and check solution, click mapping start.
2. Connect the usb or nexus cable with the device in order of port
number.
3. If you have the disable port, click “SKIP” button.
4. After mapping is completed, click “Save & Exit” button.
Connection in 1
st
port Connection in 2
nd
port
.
.
.
Device Detection
USB Port Mapping
Configuration
to Download
USB Driver Installation
to Download
Whole Process
3. USB Port Mapping
5.2.1.2
To Next Page
Loading...
