LG GD580 - Procedure to Check

- 120 -
LGE Internal Use Only Copyright © 2009 LG Electronics. Inc. All right reserved.
Only for training and service purposes
4. Trouble Shooting
4.13 Procedure to check
start
Oscilloscope setting
1. Check
Power Source Block
2. Check
VCXO Block
Agilent 8960 : Test mode (WCDMA)
Ch. 9750 (Uplink)
Ch. 10700 (Downlink)
4. Check
WCDMA Block
Agilent 8960 : Test mode (GSM)
Ch. 190, P.L. 7 level setting
Ch. 190, -60dBm setting
5. Check
GSM Block
Redownload SW, Cal
3. Check
Ant. SW Module