EasyManua.ls Logo

LG GD580 - Battery Information and Care

LG GD580
236 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 13 -
Copyright © 2009 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
2. Performance
2) Transmitter – WCDMA Mode
No
1
2
3
4
5
6
7
8
9
10
11
12
13
Spectrum emission Mask
-35-15*(
f-2.5)dBc@
f=2.5~3.5MHz, 30k
-35-1*(
f-3.5)dBc@
f=3.5~7.5MHz, 1M
-39-10*(
f-7.5)dBc@
f=7.5~8.5MHz, 1M
-49 dBc@
f=8.5~12.5MHz, 1M
Adjacent Channel
Leakage Ratio(ACLR)
-33dBc@5MHz, ACP>-50dBm
-43dBc@10MHz, ACP>-50dBm
Change of TFC
±25us
power varies according to the data rate
DTX: DPCH off
(minimize interference between UE)
Power setting in uplink
compressed
±3dB(after 14slots transmission gap)
Inner Loop Power control
in uplink
Adjust output (TPC command)
cmd 1dB 2dB 3dB
+1 +0.5/1.5 +1/3 +1.5/4.5
0 -0.5/+0.5 -0.5/+0.5 -0.5/+0.5
-1 -0.5/-1.5 -1/-3 -1.5/-4.5
group(10equal command group)
+1 +8/+12 +16/+24
Occupied
Bandwidth(OBW)
< 5MHz(99%)
Out-of-synchronization
handling of output power
Qin/Qout:DPCCH quality levels
Toff@DPCCH/lor:-22->-28dB
Ton@DPCCH/lor:-24->-18dB
Transmit OFF Power -56dBm(3.84M)
Transmit ON/OFF Time
Mask
±25us
PRACH, CPCH, uplink compressed mode
Minimum Output Power < -50dBm(3.84MHz)
Item Specification
Maximum Output Power Class3: +24dBm(+1/-3dB)
Frequency Error ±0.1ppm
Open Loop Power control
in uplink
±9dB@normal, ±12dB@extreme

Table of Contents

Other manuals for LG GD580

Related product manuals