- 153 -
Copyright © 2009 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
4. Trouble Shooting
4.18.6 Checking RX I,Q
To verify the RX path you have to check the pk-pk level and the shape of the
RX I,Q.
Feed a CW signal at 2142MHz
with a power level of –60dBm.
Figure 4-18-14. RX I,Q signal (CW:2142MHz)
Figure 4-18-13. RF3100, WCDMA Transceiver (Bottom)
About 2 MHz
Figure 4-18-15. RX I, Q signal
WRX_Q_P (PIN 2)
WRX_Q_N (PIN 1)
WRX_I_N (PIN 3)
WRX_I_P (PIN 4)
WRX_I_
P (PIN 4)
WRX_I_N (PIN 3) WRX_Q_P(PIN 2)
WRX_Q_
N(PIN 1)
To Next Page
Loading...
