NOTE
The displayed temperature is the target
temperature, and not the actual temperature
of the refrigerator. The actual refrigerator
temperature depends on the food inside the
refrigerator as well as ambient temperatures and
how often the doors are opened and closed.
Control Panel (Applicable to some models only)
Control Panel Features
Express Freeze
This function increases both ice making and
freezing capabilities.
When you touch the
y
Express Freeze
button,
the graphic will illuminate in the display and
will continue for 3 hours. The function will
automatically disable itself after 3 hours.
You can stop this function manually by
y
touching the button one more time.
Fridge Temperature
Indicates the set target temperature of the
refrigerator compartment in Celsius (°C).
The recommended Fridge set temperature in
normal ambient conditions and loads is 3°C ~ 4°C.
Freezer Temperature
Indicates the set target temperature of the
freezer compartment in Celsius (°C).
The recommended Freezer set temperature
in normal ambient conditions and loads is
-18°C ~ -20°C.
Pure N Fresh
When the Replace lamp is on, replace the Pure N
Fresh filter.
When the “Replace” lamp is turned on,
y
replace the filter to maintain the performance
of the Pure N Fresh Filter function.
To replace the filter, press the
y
button on
the touch control panel to the OFF mode so
that the filter icon is not illuminated and the
blue Pure N Fresh LED inside the refrigerator
remains off. The Pure N Fresh function has
three modes, The Pure N Fresh function
has three modes, Off(default mode when
icon is not lit up), Auto(when icon is lit up)
and Power(when icon and Power are lit up).
Power mode can be engaged by pressing the
Pure N Fresh touch control respectively.
Off>Auto>Power>Off>Auto….
Power mode will resume back to Auto
mode after 4 hours.
To Next Page
Loading...
