13
INSTALLATION
ENGLISH
Accessories
*1 This feature is only available on some models.
a
Spanner A
*1
b
Spanner B
*1
c
Water Filter
*1
d
Water Tube
*1
e
Tube Connector and Clip
*1
f
Tube Connector and Valve
*1
g
C-Clip (Snap Ring)
*1
Removing the Fridge and 
Freezer Door
The number of wire harnesses may vary depending 
on the model.
If your entrance door is too narrow for the 
appliance to pass through, remove the appliance 
doors and pass the appliance laterally.
•  Disconnect the power cord, house fuse or circuit 
breaker before installing, removing the doors, or 
cleaning the appliance. Failure to follow these 
instructions may result in death, fire or electric 
shock.
Removing the Hinge Cover
Remove the screws from the hinge cover at the top 
of the appliance. Lift the hook (not visible), located 
at the bottom of the front side of the cover with a 
flat-head screwdriver.
Removing the Left Fridge Door
1
The water supply line is connected to the top 
right part at the back of the appliance. Hold the 
water supply connection and gently push the 
collet 
a
 to detach the water supply line then 
unscrew the plastic tube cover for easy tube 
removal and reinstallation.
•  Connections may vary by model.
• Type A
*1
• Type B
*1
*1 This feature is only available on some 
models.