LG GF-L708BSL - Cleaning the Mini Table

42
EN
Cleaning the Mini Table
Removing the Mini Table
1
Open the door in door.
2
Push out and gently remove the rubber
cover (2) on the left bottom side of the mini
table with a small flat screw driver after the
mini table has been folded up (1) in a
vertical position.
2
3
Insert a small flat screw driver into the hole
of the movable pin. Slide the pin to the right
and remove the mini table.
Refitting the Mini Table
1
Open the door in door. Insert the fixed pin
of the mini table into the right side pin hole
of the door in door frame.
2
Insert the small flat screw driver into the
hole of the movable pin. Push the pin to the
right and refit the mini table.
3
Insert the rubber cover into the hole of the
mini table.
NOTE
• Make sure that it is refit securely and check
that the pins are fully in the holes of the door
in door frame.