Chapter 5 Frame Editor
5-34
5.3.2 Reading of flash memory
Read flash memory is for checking the type and the version of O/S and other company’s driver saved in flash
memory of Cnet I/F module. Reading is allowed in all modes except Loop-Back mode with the following procedure as
below.
1) Select Read flash memory of sub-menu in flash memory from online menu of menu bar to display the following
screen where to read flash memory information. Herein, select applicable slot and library and then press Read to
check the type and the version of driver downloaded in Cnet I/F module.
2) Select OS in system information and run Read to read the version of Cnet Flash ROM.
To Next Page
Loading...
Need help?
General
