LG GR-151CN - Specifications; Parts Identification

1. SPECIFICATIONS
1-1 GR-151
ITEMS
DOOR TYPE
NET CAPACITY
CONDENSER TYPE
DEFROSTING SYSTEM
TEMPERATURE CONTROL
INSULATION DOOR
CABINET
SPECIFICATIONS
1 DOOR
4.42ft 3
WALL CONDENSER
(FLUSH BACK)
MANUAL
KNOB DIAL
POLYURETHANE
POLYURETHANE
ITEMS
EVAPORATOR
DIMENSION (W X H X D)
NET WEIGHT
REFRIGERANT
LUBRICANT NS Series
COMPRESSOR
SPECIFICATIONS
ROLL BOND TYPE
19 X 331/2X 215/8in
66.14 Ib
R-134a (3.35 oz)
HTS-150 FREOLc_22G
(180 cc) (180 cc)
2. PARTS IDENTIFICATION
EVAPORATOR (Inside Door)
- The heart of the refrigerator. _\\
- It evaporates the refrigerant \\
fluid and thereby absorbs \\
heat from the interier. \
__THERMOSTAT
Regulates the operation of
J
the motor and controls the
temperature inside the
refrigerator.
ICE CUBETRAY
Ice cubes are easy to
remove from the tray
Keeps bottles, cans, or jars.
DRIP TRAY
Catches the water that
drips off the evaporator
when defrosting.
PLASTIC COATED
SHELVES
Have full width and can
slide out.
=RTER
Keeps any kinds of bottles.
GASKET
Tight fitting door seal
keeps all the cooling
power locked inside.
No hooks or latches.
GLASSLID & VEGETABLECONTAINER
NOTE :This is a basic model. The shape of refrigerator is subject to change.
BAR
Keeps cans.
-5-