LG GR-151SPF - SPECIFICATIONS; GR-151 Model Technical Specifications; PARTS IDENTIFICATION; Refrigerator Components Overview

1. SPECIFICATIONS
1-1 GR-151
ITEMS
DOOR TYPE
NET CAPACITY
CONDENSER TYPE
DEFROSTING SYSTEM
TEMPERATURE CONTROL
INSULATION DOOR
CABINET
SPECIFICATIONS
1DOOR
124 l
WALL CONDENSER
(FLUSH BACK)
MANUAL
KNOB DIAL
POLYURETHANE
POLYURETHANE
ITEMS
EVAPORATOR
DIMENSION
NET WEIGHT
REFRIGERANT
LUBRICANT
LUBRICANT VS Series
COMPRESSOR
NS Series
COMPRESSOR
SPECIFICATIONS
ROLL BOND TYPE
484(W)X850(H)X549(D)mm
30 Kg
R_12 (80g)
R-12(80g) R-134a(95g)
HTS*150 FREOL (z22G
(200cc) (200cc)
HTS*150 FREOL (z22G
(180cc) (180cc)
2. PARTS IDENTIFICATION
EVAPORATOR(Door Inside) __
- The heart of the refrigerator. \4,,\
- It evaporates the refrigerant \\
\
fluid and thereby absorbs \
\
heat from the surrounding. \
ICE CUBETRAY(DoorInside)
Ice cube is easy to remove
from the tray
THERMOSTAT
Regulates the operation of
the motor and controlls the
temperature inside the
refrigerator.
DRIP TRAY
Catches the water that
drips off the evaporator
when defrosting.
PLASTIC COATED
SHELVES
Have full width and can
slide out,
GLASS LID & VEGETABLE
CONTAINER
NOTE : This is a basic model. The shape of refrigerator is subject to change.
3AN
Keeps any kinds of bottles.
- Tight fitting door seal
keeps all the cooling
power locked inside.
- No hooks or latches.
-7-