The following description is basically for GR-R472/GR-R522, GR-S472/GR-S522, GR-472/GR-522. For the other models,
refer to the diagram of the entire PCB circuit.
7-1 FUNCTION
7-1-1 FUNCTION
1. When the appliance is plugged in, it is set to ‘Medium’. Each time the button is pushed, it is set to
‘Medium’→‘Medium/High’→‘High’→‘Low’→‘Medium/Low’→‘Medium’ in order.
2. When the power is initially applied or restored after a power failure, it is automatically set to ‘Medium’.
7. DESCRIPTION OF FUNCTION & CIRCUIT OF MICOM
- 20 -