LG GS290 - Page 141

- 142 -
LGE Internal Use Only Copyright © 2010 LG Electronics. Inc. All right reserved.
Only for training and service purposes
11. STAND ALONE TEST
GS290 Operational Description Revision B
LG Electronics 131/136 LGE Property
ྜྷG For the purpose of the Standalone Test, Change the Phone to “ptest mode” and then Click the “Reset” bar.
ྞG Select “Non signaling” in the Quick Bar menu. Then Standalone Test setup is finished.
ԝ
Ԝ
Change
“
ptest mood”