- 32 -
LGE Internal Use Only Copyright © 2010 LG Electronics. Inc. All right reserved.
Only for training and service purposes
3. TECHNICAL BRIEF
GS290 Operational Description Revision B
LG Electronics 34/136 LGE Property
–driver for Vibra Motor with adjustable voltages, soft startup / shutdown and current limitation
SM-POWER offers several control functions
– Power-on Reset Generator with logic state machine
– I2C bus interface
– I2C bus configurable mode control logic with ON (push-button or RTC), VCXOEN and LRF3EN (wake-up by
Bluetooth) inputs
– Programable interrupt channels to handle peripherals like SIM, MMC and USB
– Monitoring of charging functions
– Undervoltage Shut-Down
– Errorflags (volatile or non-volatile) from many power-supply functions and thermal sensor in order to debug
system
– Overtemperature Shut-Down
– Overtemperature Warning
– Support of S-GOLD standby power-down concept
– Support of S-GOLD Power-Down Pad Tristate Function
Table 6. LDO Output Table of SM-Power
LDO Net name Output Voltage Output Current Usage
SD1 1V35_Core 1.35V 600mA Core & for LDO
SD2 1V8_SD 1.8V 300mA Memory
VAUX 2V9_VAF 2.9V 100mA Cam Auto Focus
VIO 2V62_VIO 2.62V 100mA Peripherals
VSIM 2V9_SIM 2.9V 70mA SIM card
VMME 2V8_VMME 2.9V 150mA u-SD
VUMTS 2V85_AMP 2.85V 110mA Headset AMP
VUSB VUSB 3.1V 40mA VUSB
VLED VLED 2.9V 10mA Not used
VAUDIOa 2V5_VAUDA 2.5V 200mA Stereo headset, Mono earpiece
VAUDIOb 2V5_VAUDB 2.5V 50mA Analog parts of S-Gold
VRF1 2V85_VRF 2.85V 150mA
2.85 V supply for SMARTi-PM
RF transceiver
VRF2 1V5_VRF 1,53V 100mA
1.5 V supply for SMARTi-PM
RF transceiver
VRF3 2V65_VBT 2.7V 150mA Bluetooth
VPLL 1V35_VPLL 1.35V 30mA S-GOLD3 PLL
VRTC 2V11_RTC 2.11V 4mA Real Time Clock
VAFC VAFC 2.65V 5mA Not used
VVIB 2V8_VLCD 2.8V 140mA LCD
GS290 Operational Description Revision B
LG Electronics 34/136 LGE Property
–driver for Vibra Motor with adjustable voltages, soft startup / shutdown and current limitation
SM-POWER offers several control functions
– Power-on Reset Generator with logic state machine
– I2C bus interface
– I2C bus configurable mode control logic with ON (push-button or RTC), VCXOEN and LRF3EN (wake-up by
Bluetooth) inputs
– Programable interrupt channels to handle peripherals like SIM, MMC and USB
– Monitoring of charging functions
– Undervoltage Shut-Down
– Errorflags (volatile or non-volatile) from many power-supply functions and thermal sensor in order to debug
system
– Overtemperature Shut-Down
– Overtemperature Warning
– Support of S-GOLD standby power-down concept
– Support of S-GOLD Power-Down Pad Tristate Function
Table 6. LDO Output Table of SM-Power
LDO Net name Output Voltage Output Current Usage
SD1 1V35_Core 1.35V 600mA Core & for LDO
SD2 1V8_SD 1.8V 300mA Memory
VAUX 2V9_VAF 2.9V 100mA Cam Auto Focus
VIO 2V62_VIO 2.62V 100mA Peripherals
VSIM 2V9_SIM 2.9V 70mA SIM card
VMME 2V8_VMME 2.9V 150mA u-SD
VUMTS 2V85_AMP 2.85V 110mA Headset AMP
VUSB VUSB 3.1V 40mA VUSB
VLED VLED 2.9V 10mA Not used
VAUDIOa 2V5_VAUDA 2.5V 200mA Stereo headset, Mono earpiece
VAUDIOb 2V5_VAUDB 2.5V 50mA Analog parts of S-Gold
VRF1 2V85_VRF 2.85V 150mA
2.85 V supply for SMARTi-PM
RF transceiver
VRF2 1V5_VRF 1,53V 100mA
1.5 V supply for SMARTi-PM
RF transceiver
VRF3 2V65_VBT 2.7V 150mA Bluetooth
VPLL 1V35_VPLL 1.35V 30mA S-GOLD3 PLL
VRTC 2V11_RTC 2.11V 4mA Real Time Clock
VAFC VAFC 2.65V 5mA Not used
VVIB 2V8_VLCD 2.8V 140mA LCD
To Next Page
Loading...
