37SMART FUNCTIONS
ENGLISH
NOTE
Wi-Fi
Problem Possible Cause Solutions
Trouble connecting appliance and
smartphone to Wi-Fi network
The password for the Wi-Fi
network was entered incorrectly.
• Delete your home Wi-Fi network
and begin the registration process
again.
Mobile data for your smartphone
is turned on.
• Turn off the Mobile data on your
smartphone before registering the
appliance.
The wireless network name (SSID)
is set incorrectly.
• The wireless network name (SSID)
should be a combination of English
letters and numbers. (Do not use
special characters.)
The router frequency is not 2.4
GHz.
• Only a 2.4 GHz router frequency
is supported. Set the wireless
router to 2.4 GHz and connect the
appliance to the wireless router. To
check the router frequency, check
with your Internet service provider
or the router manufacturer.
The distance between the
appliance and the router is too far.
• If the appliance is too far from the
router, the signal may be weak
and the connection may not be
router closer to the appliance
or purchase and install a Wi-Fi
repeater.
• For best results, do not move the phone while the tones are being transmitted.
• If the call center agent is not able to get an accurate recording of the data, you may be asked to try again.
• The Smart Diagnosis™ function depends on the local call quality.
• Bad call quality may result in poor data transmission from your phone to the call center, which could cause
Smart Diagnosis™ to malfunction.
To Next Page
Loading...
