- 103 -
Copyright © 2009 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
4. TROUBLE SHOOTING
For testing, Max power output is needed.
Check TP1
Over 21 dBm ?
Check TP2
Over 21 dBm ?
Check TP3
Over 21 dBm ?
Check TP4
Over 7 dBm ?
Check ANT_SEL 0, 1, 2
(High, Low, Low)
Check PAM Block
Refer to 1.5.4
RF Tx Level is OK
Yes
No
Check TX Module
Yes
No
Check Duplexer
Yes
Yes
Check RTR6285
No
No
RTR6285 Maximum output Power = 7 dBm
RTR6285 minimum output Power = -80 dBm
PAM(SKY77195) = Maximum input Power = 10 dBm
To Next Page
Loading...
