- 132 -
LGE Internal Use Only Copyright © 2009 LG Electronics. Inc. All right reserved.
Only for training and service purposes
4. TROUBLE SHOOTING
Bluetooth RF Test procedure
1. Set phone to Bluetooth test-mode.
- Blue tooth ON: Enter Test Mode(3845#*620#) Æ Module test set Æ BT DUT Æ BT DUT ON
2. Insert a phone in a TEMCELL (in case of radiation test)
3. Set ‘discover’ after push menu button of the tester and select the link analyzer.
4. After ‘set test mode’, confirm the connection state.
5. Measure the power of full channel after hopping mode is selected to ‘ON’
6. You can select wanted test cases after getting an optimized power
7. Blue tooth On/Off
- Menu KeyÆsettingsÆWireless controlsÆBluetoothÆTurn on/Turn off
CLK_IN
To Next Page
Loading...
