-167-
This helper function for Factory Mode Auto Test provides interfaces for the following:
1. To view the current auto test list;
2. To add a test to the list;
3. To remove a test from the list;
4. To change the priority of a test in the list, i.e. to adjust the order of test items in the list.
1.9. Debug Info
Item Function Selection Description
Last Exception
Read To read and display information
about the last exception.
System Stats Write To write stats.
Drive Letter Read To read and display information
about Drive Letter.
1.10. Bluetooth
To test the Bluetooth Module.
Item Function Selection Value Description
General Test Press OK to Start
testing
To do the General Test
Bluetooth RF Test Press OK to Start
testing
To test the Bluetooth RF
Get Chip Version Press OK To get the Chip Version
Bluetooth UPF
Test
Press OK to Start
testing
To test Bluetooth UPF
Bluetooth
1.11. Profiling
Item Function Selection Value Description
Memory Monitor Press OK To monitor control buffer(OSL)
and APPMEN(ASM) , and
after setting will display result
at left screen .
Momory Statistic Press OK Statistics of ASM to display
Pool size and max of screen id
and app id.
Profiiling
1.12. RF Test Tool
To test the RF. Press LSK OK and begin to test the RF.
1.13. Format NVRAM but keep K
To Erase Nvram Data but will keep calibration data and IMEI , BT Address , SN
number .
To Next Page
Loading...
