7
SAFETY INSTRUCTIONS
ENGLISH
• Use the correctly rated breaker or fuse.
- There is risk of fire or electric.
• Do not modify or extend the power cable.
- There is risk of fire or electric shock.
• Do not install, remove, change, inspection and maintenance,
repair or reinstall the unit by yourself (customer).
- There is risk of fire, electric shock, explosion, or injury
• Do not change, remove the safety devices
- There is risk of death, injury
• If antifreeze agent is needed, it should be handled by
professional only. Anti-freeze can be regarded as toxic (Acute
Tox.4, H302).
- There is a risk of injury.
• For installation, always contact the dealer or an authorized
Service Center.
- There is risk of fire, electric shock, explosion, or injury.
• Do not install the unit on a defective installation stand.
- It may cause injury, accident, or damage to the unit.
• Be sure the installation area does not deteriorate with age.
- If the base collapses, the unit could fall with it, causing property
damage, unit failure, and personal injury.
• Do not install the water pipe system as Open loop type.
- It may cause failure of unit.
• Use a vacuum pump or inert (nitrogen) gas when doing leakage
test or purging air. Do not compress air or oxygen and do not use
flammable gases.
- There is the risk of death, injury, fire or explosion.
• Make sure the connected condition of connector in product after
maintenance.
- Otherwise, it may cause product damage.
• Do not touch leaked refrigerant directly.
- There is risk of frostbite.
To Next Page
Loading...
Need help?
General