1. Application range
This specification is applied all of the DLP Projector FM12A chassis.
2. Requirement for Test
* Each part is tested as below without special appointment.
(1) Temperature : 25 ºC ± 5 ºC, CST : 40 ºC ± 2 ºC
(2) Relative Humidity : 65 % ± 10 %
(3) Power Voltage : Standard input voltage (100 V - 240 V @ 50 Hz / 60 Hz)
* Standard Voltage of each products is marked by models.
(4) Specification and performance of each parts are followed each drawing and specification by part number in accordance with
BOM.
(5) The receiver must be operated for about 30 minutes prior to the adjustment.
3. Test method
(1) Performance: LGE TV test method followed
(2) Required other specification
- Safety : UL, CSA, IEC, CE specification(EN55022 Class B)
- EMC : FCC, ICES, IEC, CE specification(EN60950-1)
4. General Specification
- 4 -
Copyright © 2011 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
SPECIFICATION
NOTE : Specifications and others are subject to change without notice for improvement
.
No. Item Specification Remark
Min Max Unit 3.579545 / 60 Hz
1. Video input applicable system 1) NTSC M
2. Power Adapter - DC 19.5 V @ 5.64 A (110 W)
3. Input Voltage AC 100 V ~ 240 ( ± 10 %) V, 50 Hz / 60 Hz
4. Market North America
5. Picture size WXGA (1280 x 800)
6. Aspect ratio 16:10
7. Operating Temperature 0 40 deg
8. Operating Humidity 80 %
9. Storage Temperature -20 60 deg
10. Storage Humidity 85 %
To Next Page
Loading...
Need help?
General
