LG IPS234VA - Self Image Setting Function; AUTO Function for Resolution

10
ENG
ENGLISH
USING THE MONITOR SET

WhenyouwanttousetwoPCinourMonitor,
pleaseconnectthesignalcable(D-SUB/
DVI-D/HDMI)respectivelyinMonitorset.

IfyouturntheMonitorsetonwhileitiscold,
thescreenmayflicker.Thisisnormal.

Somered,green,orbluespotsmayappear
onthescreen.Thisisnormal.


Thisfunctionprovidestheuserwithoptimal
displaysettings.Whentheuserconnects
themonitorforthefirsttime,thisfunction
automaticallyadjuststhedisplaytooptimal
settingsforindividualinputsignals.(Only
supportedinAnalogMode)


Whenyouencounterproblemssuchas
blurryscreen,blurredletters,screenflicker
ortiltedscreenwhileusingthedeviceor
afterchangingscreenresolution,pressthe
AUTOfunctionbuttontoimproveresolution.
(OnlysupportedinAnalogMode)
 

Connectthesignal
inputcableandtighten
itbyturningthescrews
clockwise.

Donotpressthescreenwithyourfingerfor
alongtimeasthismayresultintemporary
distortiononthescreen.

Avoiddisplayingafixedimageonthe
screenforalongperiodoftimetoprevent
imageburn.Useascreensaverifpossible.

SelfImageSettingFunction
Pressthepowerbuttononthebottompanelto
turnthepoweron.Whenmonitorpoweristurned
on,the""Functionisexecuted
automatically.(OnlysupportedinAnalogMode)