LG KF350 Service Manual

- 151 -
11. STAND-ALONE TEST
11.2 Tx Test
1 Click “Non signaling mode” bar and then confirm “OK” text in the command line.
2 Put the number of TX Channel in the ARFCN.
3 Select “Tx” in the RF mode menu and “PCL” in the PA Level menu.
4 Finally, Click “Write All” bar and try the efficiency test of Phone.
LGE Internal Use Only Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
Change“ptest mood ”

LG KF350 Specifications

General

Brand	LG
Model	KF350
Category	Cell Phone
Language	English