To Next Page

To Previous Page

- 8 -

1. INTRODUCTION

E. Notice of Radiated Emissions

The KF350 complies with rules regarding radiation and radio frequency emission as defined by local

regulatory agencies. In accordance with these agencies, you may be required to provide information

such as the following to the end user.

F. Pictures

The pictures in this manual are for illustrative purposes only; your actual hardware may look slightly

different.

G. Interference and Attenuation

An KF350 may interfere with sensitive laboratory equipment, medical equipment, etc. Interference

from unsuppressed engines or electric motors may cause problems.

H. Electrostatic Sensitive Devices

ATTENTION

Boards, which contains Electrostatic Sensitive Device(ESD), are indicated by the sign.

Following information is ESD handling: Service personnel should ground themselves by using a wrist

strap when exchange system boards.

When repairs are made to a system board, they should spread the floor with anti-static mat which is

also grounded. Use a suitable, grounded soldering iron. Keep sensitive parts in these protective

packages until these are used. When returning system boards or parts such as EEPROM to the

factory, use the protective package as described.

LGE Internal Use Only

Only for training and service purposes

LG KF350 Service Manual

Other manuals for LG KF350