- 25 -
3. TECHNICAL BRIEF
D. SIM interface
The AD6726 provides SIM Interface Module. The AD6726 checks status periodically during
established call mode whether SIM card is inserted or not, but it doesn't check during deep Sleep
mode. In order to communicate with SIM card, 3 signals SIM_DATA, SIM_CLK, SIM_RST(GPIO_23)
are required. The descriptions about the signals are given by bellow Table 3-5 in detail.
LGE Internal Use Only
Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
Signals Description
SIM_DATA
This pin receives and sends data to SIM card.
This model can support 3.0 volt and 1.8 volt interface SIM card.
SIM_CLK Clock 3.25MHz frequency.
SIM_RST
Reset SIM block
(GPIO_23)
Table 3.5.D SIM CONTROL SIGNALS DESCRIPTION
Figure 3.5.D2 SIM Interface of AD6726
To Next Page
Loading...
