LGE Internal Use Only
Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
- 111 -
10. ENGINEERING MODE
A. About Engineering Mode
Engineering mode is designed to allow a service man/engineer to view and test the basic functions
provided by a handset.
B. Access Codes
The key sequence for switching the engineering mode on is 2945#*#. Pressing END will switch
back to non-engineering mode operation.
C. Key Operation
Use Up and Down key to select a menu and press ‘select’ key to progress the test. Pressing ‘back’ key
will switch back to the original test menu.
D. Engineering Mode Menu Tree
10. ENGINEERING MODE
Engineering Mode
MF mode ELT Mode Version Factory
Reset
Eng Mode
All Auto Test
Main LCD
LCD Backlight
Key Backlight
Speaker
Vibrator
Camera
MicRcv
Keypad
Automatic
Manual
Call Timer
Band
Selection
Battery Info
Audio
Tuning
UART
Setting
BT Test
Network
Info
Cell Env.
(Idle)
Cell Env.
(Ded)
To Next Page
Loading...
