LGE Internal Use Only
Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
- 114 -
10. ENGINEERING MODE
10.5.3 Battery info
1) TEMP Cal : This displays the value of Temperature Calibration. The following menus are displayed
in order : TEMP_HIGH_LIMIT, TEMP_HIGH_RECHARGE_LMT, TEMP_LOW_RECHARGE_LMT,
TEMP_LOW_LIMIT
2) Bat Cal : This displays the value of Battery Calibration. The following menus are displayed in order :
BAT_LEV_4V, BAT_LEV_3_LIMIT, BAT_LEV_2_LIMIT, BAT_LEV_1_LIMIT, BAT_IDLE_LI MIT,
BAT_INCALL_LIMIT, SHUT_DOWN_VOLTAGE, BAT_RECHARGE_LMT
3) MVBAT ADC : This displays Battery voltage ADC.
4) AUX ADC : This displays AUX ADC.
5) TEMPER ADC : This displays temperature ADC.
10.5.4 Audio Tuning
Audio Tuning mode is designed to allow a engineer to view and tune the audio parameter.
0x0000 ~ 0xFFFF2. aecCnfg
1. Enable / 2. Disable1. aecCtrl2. Downlink
4. test table 3
3. test table 2
2. test table 1
1. default table12. aecTailControlGainTable
0x0000 ~ 0xFFFF11. aecMinLineCouplingFactor
0x0000 ~ 0x7FFF10. aecMinLemCouplingFactor
0x0000 ~ 0xFFFF9. aecDlUlDelay
1. Enable / 2. Disable8. aecEnableComfortNoise
0x0000 ~ 0x7FFF7. aecNlpAttenuation
1. Enable / 2. Disable6. aecEnableNlp
1. Enable / 2. Disable5. aecEnableCoefUpdate
0x0000 ~ 0x40004. aecMaxStepSize
0x0000 ~ 0xFFFF3. aecResidualThreshold
0x0000 ~ 0xFFFF2. aecMicThreshold
1. Enable / 2. Disable1. aecMode1. Uplink5. Echo Canceller
6. test table5
5. test table4
4. test table3
3. test table2
2. test table1
1. default table4. Filter tables
0 ~ 1003 Sidetone Gain
0x0000 ~ 0xFFFF2. Digital Gain
12 ~ -48 dB1. Analog Gain2 Downlink Gain
0x0000 ~ 0xFFFF2. Digital Gain
0 ~ 22.5 dB1. Analog Gain1 Uplink Gain
1. Handset
2. Headset
3. Speakerphone
4. Bluetooth
5th Menu4th Menu3rd Menu2nd Menu1st Menu
To Next Page
Loading...
