LG L1719S - Control Panel and OSD Operation; Control Panel Overview and Buttons

- 10 -
DISASSEMBLY-Stand
In assembly state, rotate stand body to upper side. Pull the stand and separate stand from monitor set.
Pull the stand and separate stand from monitor set.
Consequently, rotate the stand body to reverse of pulling
direction.
# 1 # 2
# 4# 3
# 5
Pull the stand body and separate the stand body from stand
base.
# 5
Pull the Base 4 ea Latches to outside until losing elasticity.
* In case of Latch 4.