A11
On Screen Display(OSD) Selection and Adjustment
To improve the clarity and stability of the screen
OSD Adjust Description
This function is suitable for analog signal input
only. This button is for the automatic
adjustment of the screen position, clock and
phase.
To minimize any vertical bars or stripes visible
on the screen background.The horizontal
screen size will also change.
To adjust the focus of the display. This item
allows you to remove any horizontal noise and
clear or sharpen the image of characters.
Phase adjustment should be done after
adjusting the Clock.
AUTO
CLOCK
PHASE
SETUP
LANGUAGE
1600x1200 75kHz / 60Hz
ELAPSED TIME 00004H
ENGLISH
RGB
IMAGE SIZE
FULL
TRANSPARENCY
50
ZOOM
OSD
To customize the screen status for a user's operating environment
OSD Adjust Description
To choose the language in which the
control names are displayed.
This function displays the image in its
original size or enlarged size so as to fit in
the full screen of the LCD panel.
To adjust the transparency of the OSD
menu screen.
To adjust horizontal and vertical image size
simultaneously.
If you want to move the zooming point, use
the H/V POSITION function in the sub-
menu. However, if the monitor turns off
when zooming in and out the screen, the
monitor will be returned to original screen.
LANGUAGE
IMAGE SIZE
TRANSPARENCY
ZOOM
TRACKING
AUTO
CLOCK
PHASE
ON
RGB
50
86
OSD
To Next Page
Loading...
Need help?
General
