•
If water or any foreign substance goes inside the product, disconnect the power cord
immediately and contact the service center.
- Otherwise, this may cause a fire or electric shock due to damage to the product.
•
Keep the power cord or AC adapter away from any heating devices.
- The cord coating may melt and cause fire or electric shock.
•
Never disassemble, repair or modify the power cord or AC adapter.
- This may cause a fire or electric shock.
•
The main cutoff device is the power cord. Please make sure the product is installed near the wall
outlet and that it is easily accessible.
•
As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power
source even if the unit is turned off.
•
Power consumption will be ‘0’ only when the power plug is unplugged.
•
Use an appliance coupler as a disconnect device.
•
For continued protection against risk of fire, replace only with same type and rating of fuse.
CAUTION
•
If the outlet pins of the power plug or AC adapter is covered with dust, be sure wipe and keep clean.
- Overheating due to layers of dust may cause a fire or electric shock.
•
If the outlet, pins of the power plug, or AC adapter is covered with water, be sure wipe and keep
clean. Additionally,
Do not touch the power plug or AC adapter with wet hands.
- This may cause an electric shock.
•
Do not turn the product on or off by plugging in or unplugging the power plug from the power
outlet. It means do not
use the power plug as a switch.
- This may cause an electric shock or product malfunction.
•
Do not unplug the power cord while the product is in use.
- Electrical shock can damage the product.
To Next Page
Loading...
