Precautions for Cleaning the Product
WARNING
•
Keep the product clean at all times.
- If you don’t clean the unit for a long time and it becomes covered in dust, it can cause fire or product
damage.
•
When you need to clean the inside of the product, you must contact the service center.
- Otherwise, cleaning without support may cause a fire, electric shock, or damage to the product.
•
When cleaning the product, unplug the power cord and wipe gently with a soft cloth to prevent scratching.
- An electric shock may occur or damage to the screen as get a scratch.
•
Do not physically come in contact with the screen of the LED Package.
- This may cause damage to the product.
•
To clean the product, use an air gun to lightly remove dust from the front frame and the screen.
- If there are foreign substances in between the LEDs on the screen, it may cause a defect in the screen.
CAUTION
•
When cleaning the product or the screen, unplug the power cord and wipe it gently with a soft
cloth. Do not spray water or other liquids directly on the product. Especially, do not clean your
product with chemicals including glass
cleaner, any type of air freshener, insecticide, lubricants,
wax (car, industrial), abrasive, thinner, benzene, alcohol, etc.,
which can damage the product or
its panel.
- This may result in fire, electric shock or product damage (deformation, corrosion or breakage).
To Next Page
