LG LB-C608RSS0 - User Manual

ENGLISH
êìëëäàâ üáõä
LG Concealed Duct
Air Conditioner
INSTALLATION MANUAL
LG
IMPORTANT
• Please read this installation manual completely before
installing the product.
• When the power cord is damaged, replacement work shall
be performed by authorized personnel only.
• Installation work must be performed in accordance with
the national wiring standards by authorized personnel
only.
• Please retain this installation manual for future reference
after reading it thoroughly.

LG LB-C608RSS0 Specifications

General

Brand	LG
Model	LB-C608RSS0
Category	Air Conditioner
Language	English

Summary

Safety Precautions

Installation Safety Guidelines

Follow all safety instructions during product installation to prevent hazards and damage.

Operation Safety

Adhere to safety measures for product operation to avoid fire, electric shock, or damage.

General Safety & Handling

Installation & Operation Precautions

Key installation and operational safety advice to ensure proper functioning and prevent issues.

Installation of Indoor, Outdoor Unit

Selecting the Best Location

Criteria for choosing optimal installation sites for indoor and outdoor units.

Piping Length and Elevation Limits

Indoor Unit Installation Procedures

Details on installing the indoor unit, including suspension and console bolt methods.

Drainage and Piping Gradient

Refrigerant Piping

Refrigerant Piping Work

Instructions for connecting refrigerant pipes, including bends and flaring.

Installation of Outdoor Unit

Outdoor Unit Location and Spacing

Requirements for selecting the outdoor unit location and maintaining service space.

Electrical Wiring

Electrical Wiring Connections

Detailed guide on wiring connections for indoor and outdoor units, including circuit breaker specs.

Connecting Pipes to the Indoor Unit

Piping Preparation & Flaring

Steps for preparing pipes, removing burrs, and performing accurate flaring.

Pipe Bending, Brazing & Flare Piping

Connecting Pipes to the Outdoor Unit

Outdoor Unit Pipe Connections

Instructions for connecting refrigerant pipes to the outdoor unit, including torque specifications.

Connecting Cables between Units

Indoor and Outdoor Unit Wiring

Cable Clamping and Routing

Air Purging and Evacuation

Leakage Test Procedure

Evacuation and System Finishing

E.S.P.(External Static Pressure) Setting

External Static Pressure Setting Modes

How to Set E.S.P?

Procedure for Adjusting ESP

Test Running

Performance Evaluation During Test Run