To Next PageTo Next Page
Need help?Do you have a question about the LG LB-H608RSS0 and is the answer not in the manual?
General| Type | Split System |
|---|---|
| Cooling Capacity | 5.8 kW |
| Heating Capacity | 6.5 kW |
| Refrigerant | R410A |
| Power Supply | 220-240V, 50Hz |
| Operating Temperature (Cooling) | 18-43 °C |
Instructions for safe installation, including circuit breakers and grounding.
Precautions for safe operation, avoiding flammable gases and wet hands.
Conditions for selecting the best location for the indoor unit installation.
Criteria for choosing the optimal location for the outdoor unit.
Table detailing pipe sizes, lengths, elevation limits, and refrigerant requirements.
How to install the indoor unit using suspension bolts and dimensions.
Method for installing the indoor unit using console bolts for drainage.
Steps for selecting, drilling, and securing suspension bolts for ceiling mounting.
Importance of unit declination and drain piping for proper water drainage.
Steps for connecting refrigerant pipes, including bending and air purge.
Selecting the outdoor unit location and required maintenance space.
Requirements for electrical wiring, power source, and circuit breakers.
Steps for connecting wires to the indoor unit's control board.
Procedures for connecting wires to the outdoor unit and earthing.
Steps for cutting pipes and removing burrs before flaring.
Step-by-step guide to adjust the External Static Pressure (E.S.P.) setting.
