12 SAFETY INSTRUCTIONS
When cleaning the product and its components,
unplug the power first and wipe it with a soft cloth.
Applying excessive force may cause scratches or
discolouration. Do not spray with water or wipe
with a wet cloth. Never use glass cleaner, car
or industrial shiner, abrasives or wax, benzene,
alcohol etc., which can damage the product and its
panel.
Otherwise, this may result in fire, electric shock
or product damage (deformation, corrosion or
breakage).
As long as this unit is connected to the AC wall outlet, it is not
disconnected from the AC power source even if you turn off this
unit by SWITCH.
When unplugging the cable, grab the plug and
unplug it, by pulling at the plug.
Don’t pull at the cord to unplug the power cord from
the power board, as this could be hazardous.
When moving the product, make sure you turn
the power off first. Then, unplug the power cables,
antenna cables and all connecting cables.
The TV set or power cord may be damaged, which
may create a fire hazard or cause electric shock.
When moving or unpacking the product, work in
pairs because the product is heavy.
Otherwise, this may result in injury.
Contact the service centre once a year to clean the
internal parts of the product.
Accumulated dust can cause mechanical failure.